From the Southport and Surfers high-rise to the commercial precincts at Robina, Bundall and Varsity Lakes, the Gold Coast runs on its cabling. We install and certify data, fibre and network cabling for Gold Coast businesses — high-rise strata, hospitality and commercial.
Prefer to talk? Call Chris — 0412 853 618
A strata common-area upgrade in Southport or an office fit-out at Robina — send your details and Chris will come back with straight advice and a fixed price. Prefer to talk? Call 0412 853 618. No pushy sales, just solid work.
The Gold Coast is a dense, high-rise commercial market unlike anywhere else in South East Queensland — the office and mixed-use towers of Southport and Surfers Paradise, the commercial precincts at Robina, Bundall and Varsity Lakes, the Gold Coast Health and Knowledge Precinct, and a vast base of body-corporate and strata buildings up and down the coast.
That building stock shapes the work. High-rise cabling is as much about riser access, building coordination and after-hours scheduling as it is about the cable — and strata and hospitality sites need clean documentation and minimal disruption to residents and guests. We're set up for exactly that.
We come from an IT and networking background, so Gold Coast cabling gets planned around how the network behaves — PoE budgets, VLAN separation, bandwidth headroom — and every run is terminated, certified and documented so your IT team, MSP or building manager can run it from day one.
The full physical layer — one organised, certified cabling platform behind every system in the building.
Structured data cabling and Cat6/Cat6a — terminated to TIA-568B and Fluke-certified, run by run.
Single-mode and multi-mode fibre backbone between floors and buildings — fusion spliced, OTDR tested.
WiFi cabling and access point installation — cabled properly so coverage holds up under load.
NBN cabling, lead-in and hand-off — coordinated with the carrier and terminated into your comms room.
Racks, patch panels and comms-room builds to a consistent layout — plus audits and remediation.
Fluke DSX certification, cable schedules, as-builts and labelling to AS/CA S009.
So much of the Gold Coast's commercial floor space is vertical. In the Southport and Surfers towers, the job hinges on riser access, after-hours scheduling and coordination with building management — you can't pull backbone up a riser through occupied floors mid-week. We schedule around that, book docks and access, and leave the comms room to a standard that passes inspection.
For the coast's huge stock of body-corporate and strata buildings, we handle common-area and riser cabling, CCTV and access-control pathways, and WiFi for shared spaces — all with the documentation a body corporate needs on file.
Beyond the towers, the Gold Coast is hospitality and commercial — hotels, venues and resorts that need cabling done after-hours around guests, plus the office and retail precincts at Robina, Bundall and Varsity Lakes and the growing health precinct around the Gold Coast University Hospital.
Different building, same approach: plan voice and data together, cable for VoIP, IP CCTV, access control and AV, and certify every run so there's a baseline if anything ever needs fault-finding. We travel the coast on a scheduled, project basis — quoted up front, no surprise travel charges.
Any work on customer cabling in Australia must be done by an ACMA-registered cabler — UNS holds Open Cabler Registration #42489 — and in commercial buildings the compliance paper trail matters as much as the cable.
AS/CA S009 — the wiring rules for customer cabling: separation, bonding, bend radius, fire-stopping and labelling. Non-compliant work can void insurance and creates faults that are expensive to find later.
Fluke DSX certification — every run tested and proven to its category, with results in your handover pack. It's the baseline landlords, body corporates and regulated tenants expect.
Full as-built documentation — cable schedules, diagrams, labelling records and photos, so your IT team or MSP can manage the infrastructure from day one.
We come to your Gold Coast site, check access conditions, building rules and any after-hours requirements, and scope the work accurately.
A detailed scope with a fixed price — components, labour and coordination broken out. No hourly rates, no surprises.
Licensed, insured technicians work around your operations. Every run Fluke-tested and certified before handover.
As-builts, test reports, cable schedules and labelling records handed over — ready for your IT team, MSP or building manager.
Not just installers — we come from an IT background, so we understand the networks that depend on the infrastructure we build.
We regularly travel the M1 to Gold Coast jobs on a scheduled, project basis — quoted up front. High-rise, strata and after-hours hospitality work is exactly the kind of cabling we're built for.
Data cabling and network infrastructure across South East Queensland — offices, industrial sites, medical, retail and strata.
ACMA Open Cabler #42489, fully insured, every run certified to AS/CA S009 with the documentation building managers expect.
“They handled a common-area network and camera upgrade across our building without disrupting residents — all scheduled after hours, all documented for the body corporate. Professional from quote to handover.”
Yes — we regularly take on Gold Coast cabling across Southport, Surfers, Robina, Bundall and Varsity Lakes. We travel the M1 on a scheduled, project basis, quoted up front so there's no surprise travel charge. Call Chris on 0412 853 618.
Yes — it's a big part of Gold Coast work. We handle riser and backbone cabling, common-area and CCTV pathways, and WiFi for shared spaces, with the after-hours scheduling and building coordination high-rise demands and the documentation body corporates need.
Absolutely. For hotels, venues and occupied towers we schedule riser and floor work after-hours or on weekends and coordinate access with management, so guests and tenants aren't disrupted.
Most office work runs $150–$250 per data point installed, terminated, tested and certified; high-rise and strata work depends on riser access and after-hours requirements. We quote fixed-price after a site survey — call 0412 853 618.
The whole physical layer — Cat6/Cat6a, fibre backbone, WiFi access point cabling, NBN lead-in, server racks and comms-room builds — all certified and documented.
Yes. ACMA Open Cabler Registration #42489, fully insured, every run certified to AS/CA S009 with Fluke DSX results in your handover pack — exactly what Gold Coast building managers and body corporates expect.
Yes — we're a white-label field partner for IT companies and MSPs. We deliver the physical cabling, testing and documentation on the Gold Coast while your team handles configuration.
Southport, Surfers Paradise, Robina, Bundall, Varsity Lakes, Burleigh, Broadbeach, Helensvale and the surrounding suburbs — plus Logan and Brisbane on the way down.
We cable Gold Coast businesses across Southport, Surfers Paradise, Robina, Bundall, Varsity Lakes, Burleigh Heads, Broadbeach and Helensvale — high-rise, strata, hospitality and commercial. We travel the M1 on a scheduled project basis, quoted up front. Site surveys are free, quotes fixed-price, and every job ends with certification and documentation. We also cover Brisbane, Logan and the wider South East Queensland region.
Tell us about the site and we'll scope it and come back with a fixed price. Installed, certified and documented by a registered cabler.
Call 0412 853 618 Get a Quote Online
Unified Network Solutions